Packet 0x5B: Identify Request
This packet is used to request information about the connected heat pump, such as capabilities and model information. This is normally requested by an MHK/Kumo unit to determine which features to enable.
The heat pump will respond with the relevant information in a 0x7B - Identify Response packet.
| Byte | Purpose | Possible Values | Supported by mUART | Notes |
|---|---|---|---|---|
| 0 | CommandType | Varies |
Command Types
This packet allows requesting multiple different packets which contain different information. Not all packets are available on all units, and some packets may be region-locked as well.
For a full list of command types, refer to the 0x7B - Identify Response documentation.